0:10

And it's a good point in the course to talk about ratio analysis,

because it'll help us review some of the material that we've covered so far.

After all, there's not a lot to computing ratios.

It's just dividing one number by another.

The real challenge is to try to understand what the ratios are telling us, and

to do so we need to reverse engineer the financial statements.

We need to think about what underlying transactions must have happened to make

the financial statements and the ratios change in the way that they changed?

In other words,

the ratios help us identify parts of the business that are changing

where we need to go in and understand better what's going on with the company.

In this video, well talk about some tips for using and misusing ratios.

And we'll also talk about something called the DuPont analysis

which is a common ratio analysis technique for understanding changes in one

of the most common ratios people look at, return on equity.

Let's get started.

1:07

Let's start by talking about how to use ratios.

So ratios are going to be useful in assessing profitability,

liquidity, and risk.

They're going to highlight sources of competitive advantage for the company, so

where the company's doing really well.

And then red flag any potential trouble spots, so where the company is struggling.

1:24

But to do this we have to compare the ratios to a benchmark.

There's no absolute benchmark, there's nothing like return on equity greater

than 16% is great, below 16% is bad.

Instead, you have to compare the company to the same company across time.

We call this a time-series analysis and it helps us highlight trends for the firm.

1:45

And we also have to compare the firm to other firms in the industry

doing what we call a cross-sectional analysis.

This is important because sometimes firm trends could be really be

driven by trends in the economy or the industry.

So to figure out whether it's the company that's doing something well, or

it's just an industry-wide phenomenon,

we have to look at the firm compared to its industry or its competitors.

2:48

>> We'll I'm not a long-short hedge fund guru.

And I guess there's the old saying that those can't do, teach.

But I have looked at a lot of financial statements in my time.

And I'm pretty confident in my claim that ratios provide an excellent diagnostic

tool to help you figure out what areas of the financial statements you need to look

into further, but they're rarely going to provide you all the answers.

3:13

Now let's talk about how to misuse ration.

Not that I recommend that, I just recommend avoiding this problem.

One of the ways that people often misuse ratios

is they don't realize that standard ratios actually can have multiple definitions.

There's no standardization or GAAP for ratio definitions.

Different sources will use different definitions.

You want to always make sure you're using the same definition across time and

across companies to make valid comparisons.

3:46

Any major changes in the firm can distort a time series analysis.

Differences in business strategy, capital structure or

business segments can make it hard to do a cross-sectional analysis.

And then in any differences in accounting methods either across time or

across companies can make the comparisons difficult as well.

4:15

>> Yes. Yes, I can.

So for major changes in a firm, imagine a software company goes out and

acquires a hardware company, so

that they can integrate their software into the hardware.

The problem is that this would make it a fundamentally different company.

It would change the amount of manufacturing capacity,

the amount of inventory, and the ratios wouldn't make sense anymore, all they

would tell you is that the company's a different firm, if you look over time.

I'll talk about differences in business strategy, an example later in the video.

As far as differences in accounting method,

one of the ones we talked about earlier in the course was some companies have brand

names on their balance sheet, if they acquired them externally in acquisitions,

whereas other companies don't have them.

That's a difference that would affect almost all the ratios that we look at and

you'd have to probably pull the brand name asset out of the one company, in order to

make meaningful cross-sectional comparisons between the two.

5:06

The final thing to keep in mind is that ratios can be manipulated by managerial

action.

So the companies' managers think that investors and analysts are all

focused on the same one ratio, like let's say an interest coverage ratio.

Then those managers have incentives to manipulate their accounting numbers to

make that ratio look good.

So always keep in mind that manipulation is a possibility.

And more importantly, don't just focus on one ratio, but

look at the whole body of ratios.

Because it's hard,

in fact impossible, to manipulate every single ratio to make it look good.

5:42

Let's talk now about specific ratios, starting with return on equity.

So is a net income of $10 million good or bad?

>> I could live with 10 millie.

Sounds like a great net income to me.

5:58

>> Yeah, if you were running a lemonade stand where your only assets were a table,

a pitcher, some glasses a bunch of lemonade and maybe a cool letterman's

jacket, then 10 million in net income would be pretty sweet.

But if you're running a company with billions and billions and billions of

dollars of assets, 10 million dollars would be pretty meager for net income.

So to assess whether 10 million dollars of net income is good or bad,

we need to know how much investment was required to get that level of net income.

So to assess whether a level of net income is good or bad,

it depends on the level of investment required to get that net income, and

that's what return on equity is going to tell us.

6:37

Return on equity is defined as net income divided by average shareholder's equity.

The numerator represents how much return the company generated for

its shareholders during the year, based on accrual accounting.

So that's the net income number that we've generated through the course.

The denominator represents the shareholder's investment in the company.

Now, one of the problems we run into is net income happens over a period of time,

whereas stockholders' equity is at a point in time.

So we have to take an average of the beginning and

ending balances of shareholder equity to approximate

it's level during the period we were generating the net income.

This ROE measures a return on investment and

if something should increase with the risk of the company.

For example, I could take a dollar and put it in a savings account with a bank and

I'd get roughly one cent of interest.

So my return on investment would be one cent.

If I'm going to take that same dollar and invest it in a company,

I'm taking much more risk, and so I should get much higher return.

As you get an ROE, much higher than one percent.

So ROE is a great starting point because you compare across all of your

investments.

And hopefully, the ROE is high enough to compensate you for

the risk that you're taking investing in the company.

Now we're going to divide ROE into two drivers.

>> To figure out whether a company is getting high or

low ROE due to operating performance or due to leverage.

8:05

So the first driver of our ROE is operating performance, which answers

the question of how effectively do managers use the company's resources,

in other words, their assets to generate profits?

The ratio that we look at here is Return on Assets or ROA.

ROA is defined as net income divided by average assets.

So what it tells you is for each dollar of assets the manager has to play with,

how much net income do they generate?

8:31

The second driver is financial leverage.

This answers the question, how much do the managers use debt to increase

available assets for given level of shareholder investment?

Financial leverage is defined as average total assets divided by average

stockholder's equity.

So for each dollar of stockholder's equity,

how much assets does the company have?

Now the only way that this can be greater than

one is if the company also borrows money, takes on liabilities.

So this is a measure of leverage in terms of it measures, how much debt the company

is taking on to buy more assets than it has in terms of dollars of equity?

One note is that this leverage ratio is very different from the other

leverage ratios that we're going to be talking about this week.

It's going to work for what we're doing with ROE, but we're going to use other

ratios when we want to measure other kinds of risk due to leverage.

9:25

>> Pardon me.

My sister just texted me back that you need to de-lever net income in ROA.

Moreover, she said,

debt-to-equity is a better leverage ration than your Financial Leverage.

>> I agree with your sister on this one.

We do need to de-lever net income for ROA, but we'll get to that later.

For now, I want to keep it simple, so that you can see the two drivers of ROE.

And yes, there are better measures of leverages for assessing things like

bankruptcy risk and long-term liquidity and we'll also get to those later.

But the financial leverage measure that we're looking at here is the right measure

if we want to see how much of ROE or return on equity is driven by the company

going out and borrowing money, the company going out and levering up.

Let me show you a picture to tie this together.

So we start with Return on Equity, and that can be split up into components.

Operating Performance, which is return on assets and

the Financial Leverage component.

And so you see in the equation,

we have ROE equals Net Income over Assets times Assets over Equity.

The Assets cancel and we get ROE equals Net Income over Equity.

10:36

Let me do a quick example.

So a company raises $100.00 from share holders,

borrows $100 from a bank to buy $200 of assets.

Those assets are then used to generate $10 of net income.

So ROE in this case would be 10%,

$10 of net income divided by $100 from shareholders.

ROA would be 5%, $10 of net income

divided by $200 of assets.

And leverage would be 2, $200 of assets divided by $100 of shareholders' equity.

Multiplying it together, 5% ROA times a leverage of 2,

gives an ROE of 10% and this highlights how these 2 components drive ROE.

So let's say, instead of buying $200 of assets with $100 shareholders equity,

we bought $400 of assets.

We borrowed 300 from the bank,

combined that with 100 from shareholders to buy 400 of assets.

Now, our leverage is 4.

If we can maintain the same ROA of 5%, our ROE would go up to 20%.

Or let's say that we keep leverage at 2, but we find a way to operate

the business more efficiently to get the performance or the ROA up to 10%,

then we'd have 10% ROA times a leverage of 2 would give us a ROE of 20%.

So, either operating performance or leverage can get you to a high ROE.

>> I am completely and utterly flamboozled by your example.

Did you not inform us mere seconds ago that one must utilize average balances?

>> Really started to flamboozled you, but I was trying to keep it simple.

I was trying to do an example, which clearly shows how these two factors,

ROA and financial leverage combine to drive ROE.

And yes, if I was doing these ratios in practice, I would take the average at

the beginning and the ending balance for both assets and for equity.

12:37

Next, we're going to look more carefully at the Return on Assets component,

which also can be separated into two drivers.

The first driver is profitability,

how much profit does the company earn on sales?

The ratio we're going to use here is Return on Sales or

ROS, which is defined as Net Income/Sales.

So what it's telling you is for each dollar of sales,

how much net income do you generate?

The other driver of Return on Assets is efficiency.

This answers the question,

how much sales does the company generate based on its available resources?

The ratio here is called Asset Turnover,

which is defined by Sales/Average Total Assets.

So for each dollar of assets, how much in sales does the company generate?

Now I'm going to go through an example of how to do this in a little bit, but first,

I have to deal with that complication that came up in the question earlier.

13:38

So ideally, Return on Assets would measure operating performance

independent of the company's financing decisions.

We want to measure of ROA, that's not at all affected by financial leverage.

The problem is the numerator of ROA, Net Income, includes interest expense.

If you have more leverage, it means you have more debt.

More debt means higher interest expense.

Higher interest expense means lower Net Income and so now,

your leverage is affecting your Net Income.

So to remove the financing effects from ROA, we have to de-lever Net Income.

So we're going to define ROA as De-Levered Net Income/Average Assets

where De-levered Net Income is Net Income +(1-t) x Interest Expense.

14:26

Where t is the tax rate.

So, what we're doing is taking after tax interest expense and

adding it back to net income.

Then when we use this De-Levered Net Income as the numerator in ROA,

we get a measure of operating performance that's not contaminated by

the company's financing decisions.

14:48

>> Ideally, you could explain this 1 minus t stuff and it would not hurt to

explain what de-lever means, and why we add interest expense to de-lever.

>> Yeah, I know the formula's are a little bit abstract.

So, let's go through an example and see how this works.

15:05

Here's a quick example to show why we need to de-lever net

income to remove the effects of financing decisions.

Let's say, we have two companies.

One that has no debt and one that has some debt.

Both companies have the same pretax, pre-interest income.

So their performances seems identical in an operating sense, then the no debt

company, obviously, has no interest expense, so their pretax income is 300.

We take off taxes of 35% and their net income is 195.

For the company that has some debt, the have interest expense.

So if they had 50 of interest expense, their pretax income would only be 250.

We take off taxes and their net income is only 162.5.

So if we use net income in the numerator for ROA, then ROA's going to be

affected by the fact that the some debt firm has some borrowing.

Now if you look in the last row, we're going to calculate de-levered net income.

We don't have to do anything for the No debt firm,

because it has no interest expense.

For the Some debt firm, we take Net income plus Interest expense times 1 minus

the tax rate, and we end up with De-levered Net Income of 195,

which is identical to the De-levered Net Income for the No debt firm.

So using De-levered Net Income in ROA,

gives us a measure of ROI that only measures operating performance.

Now when we use ROE, we do want the interest expense in there because

ROE does want to reflect the effected financing so

we take the financing out of ROA but we leave the financing in for ROE.

16:46

Hey, is this the same DuPont that makes the model airplane glue?

>> Hey, it is pronounced du Pont, it is named after Eleuthere Irenee du Pont.

>> Thanks for the correct pronunciation there Rene.

But yes, this formula was developed by people that work for

the DuPont Chemical company back in the 19th century.

In 1914, DuPont bought a big stake in this start up company called General Motors,

which eventually became the largest car company in the world.

17:16

And when the DuPont management team started working with General Motors,they

would use this formula a lot.

So much so that the GM people would say hey, give me the DuPont formula analysis.

And that's where the formula got the name, and we've continued to use it since then.

17:32

So anyway, we've seen that Return on Equity has two drivers,

Return on Assets and Financial Leverage.

And Return on Assets has two drivers, Return on Sales and Asset Turnover.

So the DuPont formula is that ROE equals Net Income over Sales,

which is Profitability times Sales over Assets,

which is Efficiency times Assets over Equity, which is Leverage.

18:16

>> Yes, now I'm going to do an extended example of how to use the DuPont formula.

Which will also allow me to show you the importance of

choosing firms that are using the same business strategy

when you want to do a ratio analysis comparison.

So I'm going to talk about the retail industry.

There's a couple big segments within the retail industry,

one segment would be discount retailers.

So those are the stores that have Mart in their name and

try to compete on low prices.

And another segment are the high-end retailers,

the ones that are located in the really expensive shopping districts.

18:49

Let's start by talking about the discount end of the market, the Mart stores.

So their strategy is very low profitability.

They have a small mark up over cost and

their strategy is to get you into the store with their low prices.

So how do they get high ROE?

By very high asset turn over.

In other words, they generate a huge amount of sales for

their investment in assets.

How do they do that?

Well their assets are things like fairly simple stores that are not constructed

from fancy materials,

they're located in rural districts where the land is pretty inexpensive.

And then when you go into the store, you don't see a lot of fancy

schmancy displays, the merchandise is just sort of crammed in there.

And they're really set up to try maximize the volume of sales for

their level of investment in assets.

So if you were looking at a discount type store.

You'd want to compare it to another company doing a discount strategy,

to see if the company's able to get a little bit extra profitability,

even though it's low in absolute terms.

Or if they're able to get much higher asset turnover.

Either one of those would give them an ROE advantage over their competitor.

19:57

On the opposite end of the spectrum, you have the high-end retailers.

Now, what I've heard that these stores are like, and I don't think I've ever actually

been in one, because I order all my clothes over the Internet, but

what I've heard is that they're really nice stores.

They're constructed of expensive materials, marbles, woods.

They're located in very expensive real estate areas.

The merchandise is not crammed in there, very nice, elegant displays.

Their asset turnover, the amount of sales they generate for

their investment in assets, is fairly low.

But when they make a sale, it's hugely profitable.

They have very high mark-up over cost.

So if you were looking at a high-end retailer,

you'd want to compare it to another high-end retailer,

to see if they're able to squeeze out even higher mark-ups.

Or if they're able to squeeze out a little bit more asset turn over,

even though it's lower in absolute terms.

So the DuPont formula allows you to look at these different drivers of ROE.

And as long as you're comparing companies that are doing the same strategy,

find out where a company's competitive advantages or

disadvantages lie in trying to execute their business model.

Now, that we have the basic framework down,

what we're going to do in the next couple of videos is look at a case study of

a company that had some real troubles in their business.

But then they changed their strategy, had a nice turnaround and

now they're performing very well.

So we'll use DuPont analysis to figure out exactly what parts of

their strategy really helped to kickstart their turnaround.

I'll see you next time.

>> See you next video.